View source for HANcoder/STM32/Blocks/Digital Input
You do not have permission to edit this page, for the following reason:
You can view and copy the source of this page.
Templates used on this page:
Return to HANcoder/STM32/Blocks/Digital Input.
You do not have permission to edit this page, for the following reason:
The action you have requested is limited to users in one of the groups: Administrators, Bureaucrats.
You can view and copy the source of this page.
Templates used on this page:
Return to HANcoder/STM32/Blocks/Digital Input.
Supported Targets: Olimexino, E407, P405
A 'Digital Input' block reads the input level of the selected pin.If the voltage on the pin comes below the 'low level voltage' the output will switch to 0 and if it comes above the 'high level voltage' it will switch to 1. Please check the datasheet for the voltage levels.
A value that indicates the state of the pin. The data type is boolean, 0 for low level and 1 for high level.
Parameter | Description |
---|---|
Input pin | The input pin to be used for the digital input. Select one from the list. A warning will appear when the pin is already in use in another block. |
Configuration | The configuration to be used. There are three options: - Floating, the pin will not connected in any way to ground or 3.3V |
Sample time | Sample time of the block. The Sample time (in seconds) defines the rate at which the block is visited by the real-time scheduler of the target. The value of the Sample time has to be an integer multiple of the base sample time of the model. |