UDP Server Receive
From OpenMBD
< HANcoder | STM32 | Blocks
Revision as of 16:10, 28 April 2017 by Jasonvankolfschoten (talk | contribs)
Supported Targets: E407
Contents
General information about UDP Server Receive
With this block you can access the data of the data packet that was most recently received by the UDP server.
Block
Mask
Outputs (outports)
The last received data will be available on these outports.
Block parameters
Parameter | Description |
---|---|
Output ports | Select the number of output ports |
Output data type | Select the output data type |
Byte order | Set the appropriate byte ordering for your CAN message: Checkbox checked = Most Significant Bit (MSB) is send first (Motorola format). Checkbox unchecked = Least Significant Bit (LSB) is send first (Intel format). |
Start index | The UDP server's receive buffer can be seen as an array of bytes. This parameter enables you to select the index of the byte where the read operation will start at. |
Sample time | The block execution time, the amount of time between consecutive executions of the block. 0.1 means the the block will be executed at 10 Hz. |
Examples
See Also
UDP client send | UDP Server init | UDP Server new data available | UDP Server receive | UDP Server receive size