Output Compare Init
From OpenMBD
< HANcoder | STM32 | Blocks
Revision as of 10:28, 5 May 2017 by Jasonvankolfschoten (talk | contribs)
Supported Targets: Olimexino, E407, P405
Contents
General information about Output Compare Init
Initializes the timer module to allow output compare functionality on the module's channels.
Block
Mask
Outputs (outports)
Function call (optional): This output is triggered when an overflow occurs [function call]
Block parameters
Parameter | Description |
---|---|
Timer module | Select the time module to use |
Frequency | Set the frequency of the timer module |
Enable IRQ output | When this checkbox is ticked an extra output appeared |
Examples
See Also
Compare Event IRQ | Get Free Running Counter | Get Last Event Counter | Reset Free Running Counter | Schedule Compare Event