HANcoder

HANcoder Open Source (04-11-2019)

HANcoder Open Source is available for download on GitLab

OpenBLT binaries (04-11-2019)

Binaries

OpenBLT bootloader version 1.0.1 by Feaser can be used for flashing the STM32 targets.
The binaries of the bootloaders are available for download: File:OpenBLT v1.0.1 Bootloaders.zip
Howto install such a bootloader initially is described in the Installation manual.

Note: OpenBLT bootloader source code is available here:

MicroBoot

The MicroBoot PC application as described in the Installation manual needs to be downloaded and installed separately: File:Microboot.zip

The path to the MicroBoot executable is set in the following file:

 ./Target/blockset/toolbox/blocks/FlashSTM32Target.m

By default, the Host folder should be at the same level as the Target folder:

 ./Host
    |
    +- /MicroBoot
    |    |
    |    +- MicroBoot.exe
    |    +- ...
 ./Target
    |
    +- /blockset
    +- /Development tools
    +-  ...

HANcoder 1.1 Beta (10-05-2019)

Download

This is a beta release.
If you are not sure this release is for you, please download HANcoder 1.0 instead.

This release adds the following support for the STM32 Olimexino target:
- XCP over UART
- servo motor control
- variable frequency for PWM outputs
- signal tower

HANcoder 1.0 (26-06-2018)

Download