View source for HANcoder/STM32/Blocks/Analog Input
You do not have permission to edit this page, for the following reason:
You can view and copy the source of this page.
Templates used on this page:
Return to HANcoder/STM32/Blocks/Analog Input.
You do not have permission to edit this page, for the following reason:
The action you have requested is limited to users in one of the groups: Administrators, Bureaucrats.
You can view and copy the source of this page.
Templates used on this page:
Return to HANcoder/STM32/Blocks/Analog Input.
Supported Targets: Olimexino, E407, P405
This blocks reads the analog value of the selected pin. The output of the block is the bit value of the conversion. When using the standard Vref of 3.3V the result of the conversion must be multiplied by 0.8mV to get the actual voltage on the pin. (The E407 has an option to enable filtering)