View source for HANcoder/STM32/Blocks/CAN Config
You do not have permission to edit this page, for the following reason:
You can view and copy the source of this page.
Templates used on this page:
Return to HANcoder/STM32/Blocks/CAN Config.
You do not have permission to edit this page, for the following reason:
The action you have requested is limited to users in one of the groups: Administrators, Bureaucrats.
You can view and copy the source of this page.
Templates used on this page:
Return to HANcoder/STM32/Blocks/CAN Config.
Supported Targets: Olimexino, E407, P405
The 'CAN Config' block instructs the code generator to include CAN support. The block also configures the CAN controller communication speed and the reception acceptance filter.
When not using the CAN config block, support for the given CAN channel is not included in the embedded target. Thereby every CAN message addressed to the controller is lost. The default configuration of the reception acceptance filter received all 11-bit CAN message identifiers.