View source for HANcoder/STM32/Blocks/Delete Error
You do not have permission to edit this page, for the following reason:
You can view and copy the source of this page.
Templates used on this page:
Return to HANcoder/STM32/Blocks/Delete Error.
You do not have permission to edit this page, for the following reason:
The action you have requested is limited to users in one of the groups: Administrators, Bureaucrats.
You can view and copy the source of this page.
Templates used on this page:
Return to HANcoder/STM32/Blocks/Delete Error.
Supported Targets: Olimexino, E407, P405
When this block is triggered, the specified error is deleted from the RAM of the controller. The error code (ID) combined with the parameter makes the error unique.
Trigger input, when the value changes from 0 to 1 the block will be executed and thus the errors will be cleared.
Input 1 (optional): Error code, the code is part of the identifier for the error. (uint16)
Input 2 (optional): Error parameter, this is also used to identify the error. (uint8)
Parameter | Description |
---|---|
Use inports | Instead of using a fixed error code and error parameter (see below), it is possible to use input port to the block to specify the error code and eror parameter. |
Error code | The error code (ID) that needs to be deleted when this block is triggered can be specified . |
Error parameter | The error parameter of the error that needs to be deleted when this block is triggered can be specified. |
Delete error | Read active error | Read stored error | Search active error | Search stored error | Store error | Total Errors