Difference between revisions of "HANcoder/STM32/Blocks/Read from EEPROM"
From OpenMBD
| Line 21: | Line 21: | ||
|- | |- | ||
| Sample time | | Sample time | ||
| − | | | + | | Sample time of the block. The Sample time (in seconds) defines the rate at which the block is visited by the real-time scheduler of the target. The value of the Sample time has to be an integer multiple of the base sample time of the model. |
|} | |} | ||
| Line 28: | Line 28: | ||
{{HANcoder/BlockFooter| | {{HANcoder/BlockFooter| | ||
| − | |SeeAlso = [[HANcoder/ | + | |SeeAlso = [[HANcoder/Write_to_EEPROM|Write to EEPROM]] {{!}} [[HANcoder/Erase_EEPROM|Erase EEPROM]] {{!}} [[HANcoder/Save_EEPROM|Save EEPROM]] |
}} | }} | ||
Revision as of 09:20, 21 April 2017
Supported Targets: Olimexino, E407, P405
Contents
General information about Read from EEPROM
A 'Read from EEPROM' block reads a value from the specified EEPROM identifier.
Block
Mask
Block inputs (inports)
Input: The identifier for the EEPROM, it is possible to store 256 values with index numbers from 0 to 255.(uint8)
Block outputs (outports)
Output: The value stored in the EEPROM for the identifier indicated at the input.(uint16)
Block parameters
| Parameter | Description |
|---|---|
| Sample time | Sample time of the block. The Sample time (in seconds) defines the rate at which the block is visited by the real-time scheduler of the target. The value of the Sample time has to be an integer multiple of the base sample time of the model. |
