Difference between revisions of "HANcoder/STM32/Olimexino"
From OpenMBD
| Line 1: | Line 1: | ||
{{HANcoder}} | {{HANcoder}} | ||
| + | |||
| + | [[File:OLIMEXINO-STM32.png| 200px]] | ||
| + | |||
| + | ==Processor information== | ||
| + | processor: STM32F103RBT6<br/> | ||
| + | clock speed: 72Mhz<br/> | ||
| + | RAM: 20kB<br/> | ||
| + | Flash: 128kB<br/> | ||
| + | |||
| + | ==Communication== | ||
| + | CAN 1x (not available when using USB communication)<br/> | ||
| + | USB 1x (not available when using CAN communication)<br/> | ||
| + | UART 2x<br/> | ||
| + | SPI 3x<br/> | ||
| + | |||
| + | ==I/O== | ||
| + | Analog input<br/> | ||
| + | Digital input<br/> | ||
| + | Frequency input<br/> | ||
| + | Quadrature encoder input<br/> | ||
| + | Digital output<br/> | ||
| + | PWM output<br/> | ||
| + | |||
| + | ==Other features== | ||
| + | Arduino pinout<br/> | ||
| + | Micro SD slot for data logging<br/> | ||
| + | Battery connector with charge controller for 3.7 Lipo cell (CANbus doesn't work when operating on battery power)<br/> | ||
| + | 9 to 30V power input<br/> | ||
| + | |||
| + | For more information about the supported features please check the block description.<br/> | ||
Revision as of 14:45, 31 March 2017
Processor information
processor: STM32F103RBT6
clock speed: 72Mhz
RAM: 20kB
Flash: 128kB
Communication
CAN 1x (not available when using USB communication)
USB 1x (not available when using CAN communication)
UART 2x
SPI 3x
I/O
Analog input
Digital input
Frequency input
Quadrature encoder input
Digital output
PWM output
Other features
Arduino pinout
Micro SD slot for data logging
Battery connector with charge controller for 3.7 Lipo cell (CANbus doesn't work when operating on battery power)
9 to 30V power input
For more information about the supported features please check the block description.
