Difference between revisions of "SIMarchitect Library Overview/Component library/Powertrain/Energy Converters/Internal Combustion Engine"
From OpenMBD
(→Module output) |
(→Module output) |
||
Line 43: | Line 43: | ||
| M<sub>ice | | M<sub>ice | ||
| phys_torque_Nm | | phys_torque_Nm | ||
− | | | + | | torque |
| Nm | | Nm | ||
+ | |- | ||
+ | | J<ubs>ice | ||
+ | | phys_inertia_kgm<sup>2 | ||
+ | | inertia | ||
+ | | kgm<sup>2 | ||
|- | |- | ||
| mech fb in [rad/s] | | mech fb in [rad/s] | ||
| ω<sub>ice | | ω<sub>ice | ||
| phys_speed_radps | | phys_speed_radps | ||
− | | | + | | rotational speed |
|} | |} | ||
Revision as of 13:06, 5 April 2018
Contents
General information about Internal Combustion Engine
test
Module
Bus Selector for module input
[[File:]]
Module output
Output | ||||
---|---|---|---|---|
Node | Variable | Name | Description | Unit |
Sensor | Mice | Eng_tqCrkSft_Nm | Crankshaft torque | Nm |
ωice | Eng_nAct_radps | Engine speed | rad/s | |
Mice+Mfric+Mexh | Eng_tqInd_Nm | Indicated torque | Nm | |
ϑice | Eng_tOilAct_K | Engine oil temperature | K | |
mech out [Nm] | Mice | phys_torque_Nm | torque | Nm |
J<ubs>ice | phys_inertia_kgm2 | inertia | kgm2 | |
mech fb in [rad/s] | ωice | phys_speed_radps | rotational speed |
Module Parameter
Variable | Parameter | Description | Unit |
---|---|---|---|
Jice | dat.inertia.value | Inertia | kgm2 |