HANcoder/Training Material/AutomaticLightControlSystem/1

<<<Go back to the introduction

>>>Go to part 2

LED Control System Part 1

Needed tools

You will need a Windows PC with the following software:

• MATLAB Simulink&REG; 2014a with the correct plug-ins (Getting started guide Olimexino)
• A HANcoder directory Download page
• A HANtune directory (optional: a HANtune.exe shortcut on your desktop) Download page
• GNU ARM Toolchain
• OpenBLT USB driver

• Olimexino STM32 board with a USB bootloader
• USB to mini USB cable

• A sensor shield
• 3 thick cables
• A potentiometer sensor brick
• A LDR sensor brick
• A LED output brick

Be careful with the hardware. Make sure that the power adapter and the USB cable are not plugged into the Olimexino when you insert the sensor shield. To prevent bent pins, you will need to make sure to keep the sensor shield straight, when taking it off the Olimexino.

<<<Go back to the introduction

>>>Go to part 2