HANcoder/Training Material/AutomaticLightControlSystem/3

<<<Go back to part 2

>>>Go to part 4

LED Control System Part 3

Part 3: Compiling the model and flashing it onto the Olimexino

The Simulink model is now ready to compile and be programmed to the Olimexino. You are now able to build the model by pressing the Build button in Simulink.

Figure 8 Build button in Simulink

After a licensing notification, MATLAB&REG; will call up the GNU ARM Toolchain to convert your model to machine code. After the S file is ready, MATLAB&REG; will start the Microboot program to flash the code to the Olimexino. A similar window to that of Figure 9 should pop up. Reset your Olimexino to flash the program.

Figure 9 Microboot waiting for target reset

 

<<<Go back to part 2

>>>Go to part 4