Difference between revisions of "SIMarchitect Library Overview/Component library/Powertrain/Rechargeable Energy Storage System/Accumulator"
From OpenMBD
< SIMarchitect Library Overview | Component library | Powertrain | Rechargeable Energy Storage System
m (Christopher Burhan moved page Library Overview/Component library/Powertrain/Rechargeable Energy Storage System/Accumulator to Library Overview/Powertrain/Rechargeable Energy Storage System/Accumulator over a redirect without leaving a redirect) |
m (Christopher Burhan moved page SIMarchitect Library Overview/Component library1/Powertrain/Rechargeable Energy Storage System/Accumulator to [[SIMarchitect Library Overview/Component library/Powertrain/Rechargeable Energy Storage System/Accumulator]...) |
(3 intermediate revisions by the same user not shown) | |
(No difference)
|
Latest revision as of 05:50, 4 June 2018
Contents
General information about Accumulator
Accumulator is a pressure vessel that is used to store a medium in a high pressure portion of the system.
Module
Bus Selector for module input
Module output
Output | ||||
---|---|---|---|---|
Node | Variable | Label | Description | Unit |
Sensor | P | Acc_presAct_Pa | Pressure | Pa |
Vg | Acc_volGas_Rat | Gas volume ratio | - | |
pressure out [Pa] | P | phys_pressure_Pa | pressure | Pa |
Module Parameter
Variable | Parameter | Description | Unit |
---|---|---|---|
𝛄 | dat.gas.adiabaticindex.value | Adiabatic index | - |
dat.vol.precharge.value | Pre-charge gas volume | m3 | |
dat.pressure.precharge.value | Pre-charge gas pressure | Pa | |
dat.vol.initial.value | Initial gas volume | m3 | |
dat.pressure.max.value | Maximum gas pressure | Pa | |
dat.capacity.value | System capacity | kWh |