SPI Master Transfer
From OpenMBD
< HANcoder | STM32 | Blocks
Revision as of 11:53, 27 April 2017 by Jasonvankolfschoten (talk | contribs)
Supported Targets: Olimexino, E407, P405
Contents
General information about SPI Master Transfer
The 'SPI Master Transfer' block performs a byte transfer via SPI.
Block
Mask
Block parameters
Parameter | Description |
---|---|
Channel | Select the SPI channel to use. |
Communication speed | Select the frequency of the SPI clock signal. |
Polarity | Select the polarity of the SPI clock signal during idle. |
Phase | Select the edge of the SPI clock signal at which time a bit should be sampled. |