Get CPU Load
From OpenMBD
< HANcoder | STM32 | Blocks
Revision as of 14:17, 27 April 2017 by Jasonvankolfschoten (talk | contribs)
Supported Targets: Olimexino, E407, P405
Contents
General information about Get CPU Load
A 'Get CPU load' block gets the CPU load of the system. This block can be used to get the CPU load of all registered tasks and interrupt service routines. Idle task is not included.
Block
Mask
Block outputs (outports)
The current or maximum CPU load.[uint8]
Block parameters
Parameter | Description |
---|---|
Mode | Select between the current or the maximum CPU load. |
Sample time | Sample time of the block. The Sample time (in seconds) defines the rate at which the block is visited by the real-time scheduler of the target. The value of the Sample time has to be an integer multiple of the base sample time of the model. |