Read from EEPROM
From OpenMBD
< HANcoder | STM32 | Blocks
Revision as of 10:21, 5 May 2017 by Jasonvankolfschoten (talk | contribs)
Supported Targets: Olimexino, E407, P405
Contents
General information about Read from EEPROM
A 'Read from EEPROM' block reads a value from the specified EEPROM identifier.
Block
Mask
Block inputs (inports)
Input: The identifier for the EEPROM, it is possible to store 256 values with index numbers from 0 to 255.(uint8)
Block outputs (outports)
Output: The value stored in the EEPROM for the identifier indicated at the input.(uint16)
Block parameters
Parameter | Description |
---|---|
Sample time | Sample time of the block. The Sample time (in seconds) defines the rate at which the block is visited by the real-time scheduler of the target. The value of the Sample time has to be an integer multiple of the base sample time of the model. |