Mechanical Auxiliary System
From OpenMBD
< SIMarchitect Library Overview | Component library | Powertrain | Auxiliary System
Revision as of 05:49, 4 June 2018 by Christopher Burhan (talk | contribs) (Christopher Burhan moved page SIMarchitect Library Overview/Component library/Powertrain/Auxiliary System/Mechanical Auxiliary System to SIMarchitect Library Overview/Component library1/Powertrain/Auxiliary System/Mechanical Auxiliary System wi...)
Contents
General information about Mechanical Auxiliary System
The mechanical auxiliary system is modeled using a controllable power loss, with the power loss is implemented as a torque loss acting on the representative shaft.
Module
Bus Selector for module input
Module output
Output | ||||
---|---|---|---|---|
Node | Variable | Label | Description | Unit |
Sensor | Mout | Aux_tqAct_Nm | Auxiliary system output torque | Nm |
mech out [Nm] | Mout | phys_torque_Nm | torque | Nm |
Jout | phys_inertia_kgm2 | inertia | kgm2 |
Module Parameter
Variable | Parameter | Description | Unit |
---|---|---|---|
Jout | dat.inertia.value | Inertia | kgm2 |