Creating a block in Simulink
From OpenMBD
With all files in place, a new block can be created.
- Open the Simulink Library Browser
- Drag-and-drop a Level-2 MATLAB S-Function into the project
- Right-click the block
- Select Mask -> Create Mask...
- Carefully copy the settings depicted in the following images:
- Type options:
SPI1: D11
SPI2: D34
- Callback:
- Click OK
- Right-click the block
- Select Block Parameters (M-S-Function)
- Fill in the parameters as follows:
- Click OK
- Change the block to a convenient size
At this point, the block has been created successfully showing twelve input ports.
By double-clicking the block, the user settable parameters are shown:
Part 2: Matlab/Simulink files - Previous | Next Part 4: Updating the build environment