Difference between revisions of "HANcoder/RC30"
From OpenMBD
< HANcoder
(Created page with "{{HANcoder}} There is no content yet for the Bodas RC30 Target. If you need information about this target please contact the developer: jason.vankolfschoten@han.nl") |
|||
| Line 1: | Line 1: | ||
{{HANcoder}} | {{HANcoder}} | ||
| − | + | RC30 Target is a real-time code generation target for MATLAB/Simulink. RC30 Target makes use of automotive grade series production controllers with a large number of inputs and outputs and adequate processing power. | |
| + | |||
| + | Supported hardware | ||
| + | |||
| + | The currently supported controllers are BODAS RC series 30 controllers from Bosch Rexroth: | ||
| + | |||
| + | |||
| + | The currently supported BODAS controllers are the RC36-20/30, RC28-14/30 and RC12-10/30. The controllers provide a wealth of robust automotive specified inputs and outputs, as shown in the following table: | ||
Revision as of 14:44, 5 May 2017
RC30 Target is a real-time code generation target for MATLAB/Simulink. RC30 Target makes use of automotive grade series production controllers with a large number of inputs and outputs and adequate processing power.
Supported hardware
The currently supported controllers are BODAS RC series 30 controllers from Bosch Rexroth:
The currently supported BODAS controllers are the RC36-20/30, RC28-14/30 and RC12-10/30. The controllers provide a wealth of robust automotive specified inputs and outputs, as shown in the following table:
