Reset ECU

From OpenMBD
< HANcoder‎ | STM32‎ | Blocks
Revision as of 09:20, 5 May 2017 by Jasonvankolfschoten (talk | contribs) (Jasonvankolfschoten moved page HANcoder/Reset ECU to HANcoder/STM32/Blocks/Reset ECU without leaving a redirect)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Supported Targets: Olimexino, E407, P405

General information about Reset ECU

When this block is triggered, the ECU resets.

Block

ResetECU.png

Mask

ResetECUMask.png

Inputs (inports)

Trigger input, when the value switches from 0 to 1 the block executes and the controller will reset.