Reset Free Running Counter
From OpenMBD
< HANcoder | STM32 | Blocks
Revision as of 14:17, 28 April 2017 by Jasonvankolfschoten (talk | contribs)
Supported Targets: Olimexino, E407, P405
Contents
General information about Reset Free Running Counter
This block resets the value of the timer module's 16-bit free running counter back to 0.
Block
Mask
Inputs (inports)
Trigger input, when the value of this signal changes from 0 to 1 the block will be executed and the free running counter will be reset to 0.
Block parameters
Parameter | Description |
---|---|
Timer module | Select the timer module of which the counter should be reset |
Examples
See Also
Compare Event IRQ | Get Free Running Counter | Get Last Event Counter | Output Compare Init | Schedule Compare Event