Difference between revisions of "HANcoder/STM32/Blocks/SPI Master Transfer"
From OpenMBD
| Line 9: | Line 9: | ||
|SampleTime = Default | |SampleTime = Default | ||
| + | }} | ||
| + | == Block parameters == | ||
| + | {| class="wikitable" | ||
| + | |- | ||
| + | ! style="width:150px" | Parameter | ||
| + | ! Description | ||
| + | |- | ||
| + | | Channel | ||
| + | | Select the SPI channel to use. | ||
| + | |- | ||
| + | | Communication speed | ||
| + | | Select the frequency of the SPI clock signal. | ||
| + | |- | ||
| + | | Polarity | ||
| + | | Select the polarity of the SPI clock signal during idle. | ||
| + | |- | ||
| + | | Phase | ||
| + | | Select the edge of the SPI clock signal at which time a bit should be sampled. | ||
| + | |} | ||
| + | |||
| + | == Examples == | ||
| + | [[HANcoder/Examples/MPU6500|MPU6500]] | ||
| + | |||
| + | {{HANcoder/BlockFooter| | ||
| + | |SeeAlso = [[HANcoder/SPI_Master_Init|SPI master init]] | ||
}} | }} | ||
Revision as of 11:53, 27 April 2017
Supported Targets: Olimexino, E407, P405
Contents
General information about SPI Master Transfer
The 'SPI Master Transfer' block performs a byte transfer via SPI.
Block
Mask
Block parameters
| Parameter | Description |
|---|---|
| Channel | Select the SPI channel to use. |
| Communication speed | Select the frequency of the SPI clock signal. |
| Polarity | Select the polarity of the SPI clock signal during idle. |
| Phase | Select the edge of the SPI clock signal at which time a bit should be sampled. |
