Difference between revisions of "HANcoder/STM32/Blocks/Total Errors"
m (Jasonvankolfschoten moved page HANcoder/Total Errors to HANcoder/STM32/Blocks/Total Errors without leaving a redirect) |
|||
Line 35: | Line 35: | ||
{{HANcoder/BlockFooter| | {{HANcoder/BlockFooter| | ||
− | |SeeAlso = [[HANcoder/Delete_Error|Delete error]] {{!}} [[HANcoder/Clear_Errors|Clear errors]] {{!}} [[HANcoder/Read_Active_Error| Read active error ]]{{!}} [[HANcoder/Read_Stored_Error| Read stored error ]] {{!}} [[HANcoder/Search_Active_Error| Search active error ]] {{!}} [[HANcoder/Search_Stored_Error| Search stored error ]] {{!}} [[HANcoder/Store_Error| Store error ]] | + | |SeeAlso = [[HANcoder/STM32/Blocks/Delete_Error|Delete error]] {{!}} [[HANcoder/STM32/Blocks/Clear_Errors|Clear errors]] {{!}} [[HANcoder/STM32/Blocks/Read_Active_Error| Read active error ]]{{!}} [[HANcoder/STM32/Blocks/Read_Stored_Error| Read stored error ]] {{!}} [[HANcoder/STM32/Blocks/Search_Active_Error| Search active error ]] {{!}} [[HANcoder/STM32/Blocks/Search_Stored_Error| Search stored error ]] {{!}} [[HANcoder/STM32/Blocks/Store_Error| Store error ]] |
}} | }} |
Latest revision as of 10:19, 5 May 2017
Supported Targets: Olimexino, E407, P405
Contents
General information about Total Errors
The number active or stored errors is given, including the highest occurring severity level, assuming that the error's parameter was used for a severity level.
Block
Mask
Block outputs (outports)
Output 1: Total number of errors, the number of different error codes that are currently active/stored.(uint8)
Output 2: Highest occurring severity. With this output it can be easily checked if the software should for example go to a safe mode.(uint8)
Block parameters
Parameter | Description |
---|---|
Active or stored error | The kind of error to be cleared. Active errors are still active at the moment and stored errors have happened before, although they could still be active. |
Sample time | Sample time of the block. The Sample time (in seconds) defines the rate at which the block is visited by the real-time scheduler of the target. The value of the Sample time has to be an integer multiple of the base sample time of the model. |
Examples
See Also
Delete error | Clear errors | Read active error | Read stored error | Search active error | Search stored error | Store error