View source for HANcoder/STM32/Blocks/UART Receive
You do not have permission to edit this page, for the following reason:
You can view and copy the source of this page.
Templates used on this page:
Return to HANcoder/STM32/Blocks/UART Receive.
You do not have permission to edit this page, for the following reason:
The action you have requested is limited to users in one of the groups: Administrators, Bureaucrats.
You can view and copy the source of this page.
Templates used on this page:
Return to HANcoder/STM32/Blocks/UART Receive.
Supported Targets: Olimexino, E407, P405
Reads a byte from the UART reception buffer.
Output 1: The value of the receive byte.
Output 2 (optional): When the status output is 0, the reception buffer was empty.
Parameter | Description |
---|---|
Channel | Select channel for UART communication |
Use status output | When this checkbox is ticked an extra output appears which show the status of the reception buffer. |
Sample time | The block execution time, the amount of time between consecutive executions of the block. 0.1 means the the block will be executed at 10 Hz. |