UART Receive Buffer Status
From OpenMBD
< HANcoder | STM32 | Blocks
Revision as of 15:12, 28 April 2017 by Jasonvankolfschoten (talk | contribs)
Supported Targets: Olimexino, E407, P405
Contents
General information about UART Receive Buffer Status
Obtains the number of received bytes that are currently stored in the reception buffer.
Block
Mask
Outputs (outports)
The number of bytes currently stored in the reception buffer.
Block parameters
Parameter | Description |
---|---|
Channel | Select channel for UART communication |
Use status output | When this checkbox is ticked an extra output appears which show the status of the reception buffer. |
Sample time | The block execution time, the amount of time between consecutive executions of the block. 0.1 means the the block will be executed at 10 Hz. |