UDS Get Seed
From OpenMBD
< HANcoder | STM32 | Blocks
Revision as of 09:27, 5 May 2017 by Jasonvankolfschoten (talk | contribs) (Jasonvankolfschoten moved page HANcoder/UDS Get Seed to HANcoder/STM32/Blocks/UDS Get Seed without leaving a redirect)
Supported Targets: Olimexino, E407, P405
Contents
General information about UDS Get Seed
This block reads the 32-bit seed value to be used in the seed/key unlock sequence.
Block
Mask
Outputs (outports)
Seed value to be used in the seed/key unlock sequence.[uint32]
Block parameters
Parameter | Description |
---|---|
Sample time | The block execution time, the amount of time between consecutive executions of the block. 0.1 means the the block will be executed at 10 Hz. |
Examples
See Also
UDS Get Key | UDS Get Seed Event | UDS Init | UDS Set Key Verified | UDS Set Seed | UDS Verify Key Event