UDS Get Seed Event

From OpenMBD
< HANcoder‎ | STM32‎ | Blocks
Revision as of 10:59, 21 March 2017 by Roel (talk | contribs) (Created page with "{{HANcoder/block| info= A 'UDS Get Seed Event' block is needed when the parameter 'UDS seed/key required' is set to TRUE (checked) in the 'UDS Init' block. This block has a...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search 
Supported Targets: Olimexino, E407, P405

General information about UDS Get Seed Event

A 'UDS Get Seed Event' block is needed when the parameter 'UDS seed/key required' is set to TRUE (checked) in the 'UDS Init' block.

This block has a function call output that gets triggered during a seed/key sequence, when the UDS module needs a seed. The connected subsystem should contain a 'UDS Set Seed' block to give the seed back to the UDS module.

Output: Allows connection of a function call subsystem.

Block

UDSGetSeedEvent.png

Mask

UDSGetSeedEventMask.png

Retrieved from "http://openmbd.eu/wiki/index.php?title=HANcoder/STM32/Blocks/UDS_Get_Seed_Event&oldid=340"