View source for HANcoder/STM32/Installation Manual
You do not have permission to edit this page, for the following reason:
You can view and copy the source of this page.
Template used on this page:
Return to HANcoder/STM32/Installation Manual.
You do not have permission to edit this page, for the following reason:
The action you have requested is limited to users in one of the groups: Administrators, Bureaucrats.
You can view and copy the source of this page.
Template used on this page:
Return to HANcoder/STM32/Installation Manual.
This document is for the user who wants to make a software program using Simulink and the HANcoder blockset for the Olimexino STM32 development board. It contains installation tutorials for the programs necessary to work with the blockset. It will also explain the template model, building a model in Simulink and flashing the software to the Olimexino. Furthermore, it will explain how you can view signals and edit parameters while the software runs on the Olimexino. This is done with a program called HANtune. So HANcoder is used to build the software program from a Simulink model and HANtune is used to view and edit (tune) the program once the program is running on the hardware. If you would encounter problems with the blockset or with HANtune, please contact the project developer Jason van Kolfschoten: Jason.vanKolfschoten@han.nl
A step by step guide on how to install Matlab Simulink and the necessary toolboxes. Learn more.
The GNU ARM Toolchain is necessary to build code for generating code for the STM32 series microcontrollers Learn more.
After installing Matlab and the GNU ARM Toolchain it is time to test the code generation from the template model. Learn more.
Putting the with Simulink generated software on the microcontroller is called flashing. Learn more.
HANtune is not doing what it is supposed to do? Read through this section to get an idea about the most encountered issues and their solutions. Learn more.