Difference between revisions of "HANcoder/Training Material/ThrottleValveController/ThrottleBodyHardware"
(Created page with "{{HANcoder}} ==Building a throttle valve setup== This page explains how to build a throttle valve setup for the throttle valve workshop. Creating HANcoder/Examples/Throttle...") |
m (Roel moved page HANcoder/Examples/ThrottleValveController/ThrottleBodyHardware to HANcoder/Training Material/ThrottleValveController/ThrottleBodyHardware) |
||
(3 intermediate revisions by one other user not shown) | |||
Line 2: | Line 2: | ||
==Building a throttle valve setup== | ==Building a throttle valve setup== | ||
− | This page explains how to build a throttle valve setup for the throttle valve workshop. [[ | + | This page explains how to build a throttle valve setup for the throttle valve workshop. [[HANcoder/Examples/ThrottleValveController| Throttle valve controller]] |
First a frame is needed to house all the parts, for this two acrylic plates are used. The plates are 4mm thick and are cut with a lasercutter. | First a frame is needed to house all the parts, for this two acrylic plates are used. The plates are 4mm thick and are cut with a lasercutter. | ||
Line 8: | Line 8: | ||
[[File:ThrottleValveControllerAcrylicPlates.jpeg]] | [[File:ThrottleValveControllerAcrylicPlates.jpeg]] | ||
− | The files needed for the lasercutter can be found below: | + | The files needed for the lasercutter can be found below in both DXF as SLDPRT format: |
− | [[File: | + | [[File: throttleplates.zip| throttleplates.zip]] |
− | |||
− | |||
Latest revision as of 11:24, 13 April 2018
Building a throttle valve setup
This page explains how to build a throttle valve setup for the throttle valve workshop. Throttle valve controller
First a frame is needed to house all the parts, for this two acrylic plates are used. The plates are 4mm thick and are cut with a lasercutter.
The files needed for the lasercutter can be found below in both DXF as SLDPRT format:
To drive the electric motor in the throttle body is driven with a BTS7960 and the Olimexino is connected with a arduino proto shield and a sensor shield. See the schematics below: