Difference between revisions of "HANcoder/Training Material/Vehicle Logger"
From OpenMBD
| Line 11: | Line 11: | ||
* MPU6500 6 degrees of freedom Accelerometer and Gyro senosor, [[HANcoder/Examples/MPU6500|more information]] | * MPU6500 6 degrees of freedom Accelerometer and Gyro senosor, [[HANcoder/Examples/MPU6500|more information]] | ||
* CAN transceiver, for example the [[HANcoder/Examples/SN65HVD230|SN65HVD230 CAN transceiver module]] | * CAN transceiver, for example the [[HANcoder/Examples/SN65HVD230|SN65HVD230 CAN transceiver module]] | ||
| − | * OBD2 connector | + | * OBD2 connector (search for J1962 on AliExpress for example) |
* microSD card | * microSD card | ||
* screw terminal connector | * screw terminal connector | ||
Revision as of 09:05, 19 April 2017
Contents
Project description
The goal of the vehicle logger is to collect data from the vehicle to be able to say something about the driving style and performance of the vehicle. With a GPS sensor the time and location and velocity of the car are recorded. A 3-axis gyroscope and 3-axis acceleration sensor is supported to be able to detect rotational speeds and accelerations on the vehicle chassis. Finally the OBD-connector of the car is used to read engine specific data. All the data is stored onto a micro-SD card.
Insert picture of end result
Insert video of end result
What hardware do you need
- Olimex E407
- GPS shield, for example the GPS Logger Shield
- MPU6500 6 degrees of freedom Accelerometer and Gyro senosor, more information
- CAN transceiver, for example the SN65HVD230 CAN transceiver module
- OBD2 connector (search for J1962 on AliExpress for example)
- microSD card
- screw terminal connector
- prototype PCB
- cigarette to 2.5mm power jack this one?
Possible extensions
With the addition of a steering angle sensor it will be possible to calculate the slip angle of the tires and it can be calculated whether the car is over-steering or under-steering.
