Difference between revisions of "HANcoder/Training Material/Vehicle Logger"
From OpenMBD
| Line 5: | Line 5: | ||
[[File:VehicleLogger.JPG|800px]] | [[File:VehicleLogger.JPG|800px]] | ||
| − | |||
== What hardware do you need == | == What hardware do you need == | ||
| Line 17: | Line 16: | ||
* prototype PCB | * prototype PCB | ||
* cigarette to 2.5mm power jack [https://www.allekabels.nl/nieuwe-producten/7184/1281597/car-cigarette-lighter-cablebrlenght-18-mtr-plug-dc-jack.html?gclid=CjwKEAjwq5LHBRCN0YLf9-GyywYSJAAhOw6msx0UN1Fhuz7HIzIspP8f71M0wf6P1RSBNH6ejxS_zBoClSLw_wcB (for example this one)] or you can get power directly from the OBD2 connector. | * cigarette to 2.5mm power jack [https://www.allekabels.nl/nieuwe-producten/7184/1281597/car-cigarette-lighter-cablebrlenght-18-mtr-plug-dc-jack.html?gclid=CjwKEAjwq5LHBRCN0YLf9-GyywYSJAAhOw6msx0UN1Fhuz7HIzIspP8f71M0wf6P1RSBNH6ejxS_zBoClSLw_wcB (for example this one)] or you can get power directly from the OBD2 connector. | ||
| − | |||
[[File:SN65HVD230.JPG|100px]] | [[File:SN65HVD230.JPG|100px]] | ||
[[File:MPU6500.jpg|100px]] | [[File:MPU6500.jpg|100px]] | ||
| − | [[File:GPSLoggerShield.jpg| | + | [[File:GPSLoggerShield.jpg|200px]] |
| + | |||
| + | == Building the vehicle logger == | ||
| + | The vehicle logger has four functions: GPS, OBD2, 6 DoF sensor | ||
Revision as of 12:58, 19 April 2017
Contents
Project description
The goal of the vehicle logger is to collect data from the vehicle to be able to say something about the driving style and performance of the vehicle. With a GPS sensor the time and location and velocity of the car are recorded. A 3-axis gyroscope and 3-axis acceleration sensor is supported to be able to detect rotational speeds and accelerations on the vehicle chassis. Finally the OBD-connector of the car is used to read engine specific data. All the data is stored onto a micro-SD card.
What hardware do you need
- Olimex E407
- GPS shield, for example the GPS Logger Shield
- MPU6500 6 degrees of freedom Accelerometer and Gyro senosor, more information
- CAN transceiver, for example the SN65HVD230 CAN transceiver module
- OBD2 connector (search for J1962 on AliExpress for example)
- microSD card
- screw terminal connector
- prototype PCB
- cigarette to 2.5mm power jack (for example this one) or you can get power directly from the OBD2 connector.
Building the vehicle logger
The vehicle logger has four functions: GPS, OBD2, 6 DoF sensor
Possible extensions
With the addition of a steering angle sensor it will be possible to calculate the slip angle of the tires and it can be calculated whether the car is over-steering or under-steering.
