Vehicle Logger
Project description
The goal of the vehicle logger is to collect data from the vehicle to be able to say something about the driving style and performance of the vehicle. With a GPS sensor the time and location and velocity of the car are recorded. A 3-axis gyroscope and 3-axis acceleration sensor is supported to be able to detect rotational speeds and accelerations on the vehicle chassis. Finally the OBD-connector of the car is used to read engine specific data. All the data is stored onto a micro-SD card.
| SN65HVD230 CAN transceiver module | MPU6500 6 Axis Accelerometer and Gyro Sensor Module | SparkFun GPS Logger Shield |
|---|---|---|
|
|
|
SN65HVD230 CAN transceiver module MPU6500 6 Axis Accelerometer and Gyro Sensor Module SparkFun GPS Logger Shield
Possible extensions
With the addition of a steering angle sensor it will be possible to calculate the slip angle of the tires and it can be calculated whether the car is over-steering or under-steering.
