Difference between revisions of "HANtune/Communication"
(Created page with "{{HANtune}}") |
|||
| Line 1: | Line 1: | ||
{{HANtune}} | {{HANtune}} | ||
| + | |||
| + | HANtune supports various ways of communicating. With regards to hardware support there are three options: Ethernet, USB and CAN. Ethernet and USB/UART can only be used in combination with the XCP (universal Calibration Protocol). The CAN-bus can be used either with or without XCP functionalities. This chapter provides more information about the (combination of) these options, as well as the general communication settings in HANtune. | ||
| + | |||
| + | Image 11: Communication Settings Dialog shows a screenshot of the communication settings in HANtune. It can be found under the menu item “Communication” > “Communication Settings” and in the connection dialog by clicking the button “Settings”. | ||
| + | |||
| + | In the tab “General” the general communication settings have to be set. A choice has to be made for a communication protocol. | ||
Revision as of 09:00, 17 March 2017
HANtune supports various ways of communicating. With regards to hardware support there are three options: Ethernet, USB and CAN. Ethernet and USB/UART can only be used in combination with the XCP (universal Calibration Protocol). The CAN-bus can be used either with or without XCP functionalities. This chapter provides more information about the (combination of) these options, as well as the general communication settings in HANtune.
Image 11: Communication Settings Dialog shows a screenshot of the communication settings in HANtune. It can be found under the menu item “Communication” > “Communication Settings” and in the connection dialog by clicking the button “Settings”.
In the tab “General” the general communication settings have to be set. A choice has to be made for a communication protocol.
