Difference between revisions of "SIMarchitect Library Overview/Component library/Powertrain/Auxiliary System/Mechanical Auxiliary System"
From OpenMBD
(→Module Parameter) |
|||
Line 1: | Line 1: | ||
{{HANADV/module | {{HANADV/module | ||
− | |info = | + | |info = The mechanical auxiliary system is modeled using a controllable power loss, with the power loss is implemented as a torque loss acting on the representative shaft. |
|moduleImage = MechAUX.jpeg | |moduleImage = MechAUX.jpeg |
Revision as of 12:46, 6 April 2018
Contents
General information about Mechanical Auxiliary System
The mechanical auxiliary system is modeled using a controllable power loss, with the power loss is implemented as a torque loss acting on the representative shaft.
Module
Bus Selector for module input
Module output
Output | ||||
---|---|---|---|---|
Node | Variable | Label | Description | Unit |
Mout | Aux_tqAct_Nm | Auxiliary system output torque | Nm | |
mech out [Nm] | Mout | phys_torque_Nm | torque | Nm |
Jout | phys_inertia_kgm2 | inertia | kgm2 |
Module Parameter
Variable | Parameter | Description | Unit |
---|---|---|---|
Jout | dat.inertia.value | Inertia | kgm2 |