Difference between revisions of "SIMarchitect Library Overview/Component library/Powertrain/Mechanical Powertrain Components/Clutch"

From OpenMBD
Jump to: navigation, search
(Module output)
(Module Parameter)
Line 50: Line 50:
 
! Style = "width:600px" | Description
 
! Style = "width:600px" | Description
 
! Unit
 
! Unit
 +
|-
 +
| J<sub>1
 +
| dat.in.inertia.value
 +
| Input side clutch plate inertia
 +
| kgm<sup>2
 +
|-
 +
| J<sub>2
 +
| dat.out.inertia.value
 +
| Output side clutch plate inertia
 +
| kgm<sup>2
 +
|-
 +
| M<sub>maxtorque
 +
| dat.maxtorque.value
 +
| Maximum torque transmitted through the clutch
 +
| Nm
 +
|-
 +
|
 +
| dat.tanh.value
 +
| Clutch actuation coefficient for smoothing the function in clutch model
 +
| -
 +
|-
 +
|
 +
| dat.speedtolerance.unit
 +
| Speed tolerance for slipping clutch
 +
| rad/s
 +
|-
 +
|
 +
| dat.actuator.timeconstant.value
 +
| Clutch actuator timeconstant
 +
| -
 +
|-
 +
|
 +
| dat.clutchthreshold.value
 +
| Minimum value for clutch pedal position to lock
 +
| -
 
|}
 
|}

Revision as of 06:50, 9 April 2018

General information about Clutch

test

Module

Clutchmodule.jpeg

Bus Selector for module input

Clutchbus.png

Module output

Output
Node Variable Label Description Unit
Sensor Clu_flgConnected_B Clutch status (disengaged or engaged) Boolean
mech out [Nm] Mout phys_torque_Nm torque Nm
Jout phys_inertia_kgm2 inertia kgm2
mech fb out [rad/s] ω2 phys_speed_radps rotational speed rad/s

Module Parameter

Variable Parameter Description Unit
J1 dat.in.inertia.value Input side clutch plate inertia kgm2
J2 dat.out.inertia.value Output side clutch plate inertia kgm2
Mmaxtorque dat.maxtorque.value Maximum torque transmitted through the clutch Nm
dat.tanh.value Clutch actuation coefficient for smoothing the function in clutch model -
dat.speedtolerance.unit Speed tolerance for slipping clutch rad/s
dat.actuator.timeconstant.value Clutch actuator timeconstant -
dat.clutchthreshold.value Minimum value for clutch pedal position to lock -