Difference between revisions of "SIMarchitect Library Overview/Component library/Powertrain/Mechanical Powertrain Components/Mechanical Connection"
From OpenMBD
< SIMarchitect Library Overview | Component library | Powertrain | Mechanical Powertrain Components
(→Module Parameter) |
m (Christopher Burhan moved page SIMarchitect Library Overview/Component library1/Powertrain/Mechanical Powertrain Components/Mechanical Connection to [[SIMarchitect Library Overview/Component library/Powertrain/Mechanical Powertrain Components/Mechan...) |
| (5 intermediate revisions by the same user not shown) | |
(No difference)
| |
Latest revision as of 05:50, 4 June 2018
Contents
General information about Mechanical Connection
Mechanical connection is used for connecting two input shafts and modeled using gear ratios and efficiencies.
Module
Bus Selector for module input
Module output
| Output | ||||
|---|---|---|---|---|
| Node | Variable | Label | Description | Unit |
| Sensor | No sensor signal | |||
| mech out [Nm] | Mout | phys_torque_Nm | torque | Nm |
| Jout | phys_inertia_kgm2 | inertia | kgm2 | |
| mech fb out 1 [rad/s] | ωout,1 | phys_speed_radps | rotational speed | rad/s |
| mech fb out 2 [rad/s] | ωout,2 | phys_speed_radps | rotational speed | rad/s |
Module Parameter
| Variable | Parameter | Description | Unit |
|---|---|---|---|
| rin,1 | dat.in1.ratio.value | Gear ratio for input 1 | - |
| J1 | dat.in1.inertia.value | Inertia | |
| ηin,1 | dat.in1.mechefficiency.torque.vec | Mechanical efficiency for input 1 = f(torque,speed) | Nm |
| dat.in1.mechefficiency.speed.vec | rad/s | ||
| dat.in1.mechefficiency.efficiency.map | - | ||
| dat.in2.ratio.value | Gear ratio for input 2 | - | |
| J2 | dat.in2.inertia.value | Inertia | |
| ηin,2 | dat.in2.mechefficiency.torque.vec | Mechanical efficiency for input 2 = f(torque,speed) | Nm |
| dat.in2.mechefficiency.speed.vec | rad/s | ||
| dat.in2.mechefficiency.efficiency.map | - | ||
| dat.out.ratio.value | Gear ratio for output | - | |
| Jout | dat.out.inertia.value | Inertia | |
| ηout | dat.output.mechefficiency.torque.vec | Mechanical efficiency for output = f(torque,speed) | Nm |
| dat.output.mechefficiency.speed.vec | rad/s | ||
| dat.output.mechefficiency.efficiency.map | - |
