Difference between revisions of "SIMarchitect Library Overview/Component library/Powertrain/Mechanical Powertrain Components/Torque Converter"
From OpenMBD
< SIMarchitect Library Overview | Component library | Powertrain | Mechanical Powertrain Components
(→Module Parameter) |
|||
| Line 1: | Line 1: | ||
{{HANADV/module | {{HANADV/module | ||
| − | |info = | + | |info = Torque Converter model is defined as a device that multiply torque. |
|moduleImage = TorqueConv.jpeg | |moduleImage = TorqueConv.jpeg | ||
Revision as of 11:40, 9 April 2018
Contents
General information about Torque Converter
Torque Converter model is defined as a device that multiply torque.
Module
Bus Selector for module input
Module output
| Output | ||||
|---|---|---|---|---|
| Node | Variable | Label | Description | Unit |
| Sensor | ωt | TC_nTurbineAct_radps | Turbine speed | rad/s |
| Mout | TC_tqTurbinAct_Nm | Turbine torque | Nm | |
| ωp | TC_nPumpAct_radps | Pump speed | rad/s | |
| Min | TC_tqPumpAct_Nm | Pump torque | Nm | |
| mech out [Nm] | Mout | phys_torque_Nm | torque | Nm |
| Jout | phys_inertia_kgm2 | inertia | kgm2 | |
| mech fb out [rad/s] | ωp | phys_speed_radps | rotational speed | rad/s |
Module Parameter
| Variable | Parameter | Description | Unit |
|---|---|---|---|
| dat.inertia.in.value | Torque converter input side inertia | kgm2 | |
| dat.inertia.out.value | Torque converter output side inertia | kgm2 | |
| dat.clutch.actuator.timeconstatnt.value | Lock-up clutch actuator timeconstant | ||
| dat.clutch.speedtolerance.value | Speed tolerance for slipping lock-up clutch | rad/s | |
| dat.clutch.maxtorque.value | Maximum torque transmitted by lock-up clutch | Nm | |
| dat.clutch.threshold.value | Lock-up clutch threshold value | ||
| dat.clutch.tanh.value | Lock-up clutch actuation coefficient for smoothing clutch model | ||
| dat.characteristics.speedratio.vec | Torque ratio = f(speed ratio) Input torque = f(speed ratio) |
- | |
| dat.characteristics.torqueratio.value | - | ||
| dat.characteristics.inputtorque.vec | Nm | ||
| dat.characteristics.refspeed.value | Reference input speed for input torque characteristics | rad/s | |
| dat.characteristics.loss.speed.value | Torque loss at locked lock-up clutch = f(speed) | rad/s | |
| dat.characteristics.loss.torque.vec | Nm |
