Difference between revisions of "SIMarchitect Library Overview/Component library/Powertrain/Rechargeable Energy Storage System/Accumulator"
From OpenMBD
< SIMarchitect Library Overview | Component library | Powertrain | Rechargeable Energy Storage System
(→Module Parameter) |
(→Module Parameter) |
||
| Line 45: | Line 45: | ||
! Unit | ! Unit | ||
|- | |- | ||
| − | | | + | | {\displaystyle \gamma } \gamma |
| dat.gas.adiabaticindex.value | | dat.gas.adiabaticindex.value | ||
| Adiabatic index | | Adiabatic index | ||
Revision as of 08:46, 9 April 2018
Contents
General information about Accumulator
test
Module
Bus Selector for module input
Module output
| Output | ||||
|---|---|---|---|---|
| Node | Variable | Label | Description | Unit |
| Sensor | P | Acc_presAct_Pa | Pressure | Pa |
| Vg | Acc_volGas_Rat | Gas volume ratio | - | |
| pressure out [Pa] | P | phys_pressure_Pa | pressure | Pa |
Module Parameter
| Variable | Parameter | Description | Unit |
|---|---|---|---|
| {\displaystyle \gamma } \gamma | dat.gas.adiabaticindex.value | Adiabatic index | - |
| dat.vol.precharge.value | Pre-charge gas volume | m3 | |
| dat.pressure.precharge.value | Pre-charge gas pressure | Pa | |
| dat.vol.initial.value | Initial gas volume | m3 | |
| dat.pressure.max.value | Maximum gas pressure | Pa | |
| dat.capacity.value | System capacity | kWh |
