Difference between revisions of "SIMarchitect Library Overview/Component library/Powertrain/Rechargeable Energy Storage System/Battery"
From OpenMBD
< SIMarchitect Library Overview | Component library | Powertrain | Rechargeable Energy Storage System
(→Module Parameter) |
(→Module Parameter) |
||
| Line 52: | Line 52: | ||
! Variable | ! Variable | ||
! Parameter | ! Parameter | ||
| − | ! Style = "width:600px, text-align:left | + | ! Style = "width:600px, text-align:left" | Description |
! Unit | ! Unit | ||
|- | |- | ||
Revision as of 09:05, 9 April 2018
Contents
General information about Battery
test
Module
Bus Selector for module input
Module output
| Output | ||||
|---|---|---|---|---|
| Node | Variable | Label | Description | Unit |
| Sensor | i | Batt_iAct_A | Battery current output | A |
| u | Batt_uAct_V | Battery output voltage | V | |
| SOC | Batt_soc_Act_Rt | State of Charge | ratio (0-1) | |
| ϑbatt | Batt_tAct_K | Battery temperature | K | |
| elec out [V] | u | phys_voltage_V | voltage | V |
Module Parameter
| Variable | Parameter | Description | Unit |
|---|---|---|---|
| ns | dat.ns.value | Number of cells connected in series | - |
| np | dat.np.value | Number of cells connected in parallel | - |
| C | dat.capacity.value | Cell capacity | Ah |
| SOC(0) | dat.initialSOC.value | Initial state of charge (as % of cell capacity) | % |
| e | dat.ocv.soc.vec | Open circuit voltage = f(state of charge) | % |
| dat.ocv.ocv.vec | V | ||
| Discharge R0 , R and C | dat.resi.discharge.soc.vec | Discharge R0 = f(state of charge) Discharge R = f(state of charge) Discharge C = f(state of charge) |
% |
| dat.resi.discharge.R0.vec | ohm | ||
| dat.resi.discharge.R.vec | ohm | ||
| dat.resi.discharge.C.vec | F | ||
| Charge R0 , R and C | dat.resi.discharge.soc.vec | Charge R0 = f(state of charge) Charge R = f(state of charge) Charge C = f(state of charge) |
% |
| dat.resi.charge.R0.vec | ohm | ||
| dat.resi.charge.R.vec | ohm | ||
| dat.resi.charge.C.vec | F |
