Difference between revisions of "SIMarchitect Library Overview/Component library/Powertrain/Rechargeable Energy Storage System/Super Capacitor"
From OpenMBD
< SIMarchitect Library Overview | Component library | Powertrain | Rechargeable Energy Storage System
(→Module Parameter) |
(→Module Parameter) |
||
Line 83: | Line 83: | ||
| dat.Vmin.value | | dat.Vmin.value | ||
| Minimum cell voltage | | Minimum cell voltage | ||
+ | | V | ||
|- | |- | ||
| e<sub>max | | e<sub>max | ||
| dat.Vmax.value | | dat.Vmax.value | ||
| Maximum cell voltage | | Maximum cell voltage | ||
+ | | V | ||
|} | |} |
Revision as of 09:28, 9 April 2018
Contents
General information about Super Capacitor
test
Module
Bus Selector for module input
Module output
Output | ||||
---|---|---|---|---|
Node | Variable | Label | Description | Unit |
Sensor | i | Capa_iAct_A | Super Capacitor current output | A |
u | Capa_uAct_V | Super Capacitor output voltage | V | |
SOC | Capa_soc_Act_Rt | State of Charge | ratio (0-1) | |
ϑCapa | Capa_tAct_K | Super Capacitor temperature | K | |
elec out [V] | u | phys_voltage_V | voltage | V |
Module Parameter
Variable | Parameter | Description | Unit |
---|---|---|---|
ns | dat.ns.value | Number of cells connected in series | - |
np | dat.np.value | Number of cells connected in parallel | - |
C | dat.capacity.value | Cell capacity | F |
R | dat.R.value | Internal resistance of cell | Ω |
dat.initialVoltage.value | Initial voltage of cell | V | |
emin | dat.Vmin.value | Minimum cell voltage | V |
emax | dat.Vmax.value | Maximum cell voltage | V |