PWM Duty Cycle
General information about PWM Duty Cycle
A 'PWM Duty Cycle' block allows the duty cycle of the generated PWM signal to changed. Note that this only works properly if a 'PWM Init' block is also present for initializing the related PWM module.
Block inputs (inports)
Input: The value of the duty cycle in 100/1023[%].(512=50%, 1023=100%).(uint16)
|Output pin||Select the output pin where the PWM signal should be generated.|
|Sample time||Sample time of the block. The Sample time (in seconds) defines the rate at which the block is visited by the real-time scheduler of the target. The value of the Sample time has to be an integer multiple of the base sample time of the model.|