Super Capacitor
From OpenMBD
< SIMarchitect Library Overview | Component library | Powertrain | Rechargeable Energy Storage System
Contents
General information about Super Capacitor
Super Capacitor is modeled using a resistor model
Module
Bus Selector for module input
Module output
Output | ||||
---|---|---|---|---|
Node | Variable | Label | Description | Unit |
Sensor | i | Capa_iAct_A | Super Capacitor current output | A |
u | Capa_uAct_V | Super Capacitor output voltage | V | |
SOC | Capa_soc_Act_Rt | State of Charge | ratio (0-1) | |
ϑCapa | Capa_tAct_K | Super Capacitor temperature | K | |
elec out [V] | u | phys_voltage_V | voltage | V |
Module Parameter
Variable | Parameter | Description | Unit |
---|---|---|---|
ns | dat.ns.value | Number of cells connected in series | - |
np | dat.np.value | Number of cells connected in parallel | - |
C | dat.capacity.value | Cell capacity | F |
R | dat.R.value | Internal resistance of cell | Ω |
dat.initialVoltage.value | Initial voltage of cell | V | |
emin | dat.Vmin.value | Minimum cell voltage | V |
emax | dat.Vmax.value | Maximum cell voltage | V |