HANcoder
Contents
HANcoder Open Source (04-11-2019)
HANcoder Open Source is available for download on GitLab
OpenBLT version 1.0.1 binaries (04-11-2019)
Binaries
OpenBLT bootloader version 1.0.1 by Feaser can be used for flashing the STM32 targets.
The binaries of the bootloaders are available for download: File:OpenBLT v1.0.1 Bootloaders.zip
Howto install such a bootloader initially is described in the Installation manual.
Note: OpenBLT bootloader source code is available here:
MicroBoot
The MicroBoot PC application as described in the Installation manual needs to be downloaded separately: File:Microboot.zip
The path to the MicroBoot executable is set in the following file:
./Target/blockset/toolbox/blocks/FlashSTM32Target.m
By default, the Host folder should be at the same level as the Target folder:
./Host | +- /MicroBoot | | | +- MicroBoot.exe | +- ... ./Target | +- /blockset +- /Development tools +- ...
HANcoder 1.1 Beta (10-05-2019)
This is a beta release.
If you are not sure this release is for you, please download HANcoder 1.0 instead.
This release adds the following support for the STM32 Olimexino target:
- XCP over UART
- servo motor control
- variable frequency for PWM outputs
- signal tower