HANcoder/Examples/Adding a customized block

This is a step-by-step guide for creating a custom block in MatLAB/Simulink and how to call custom functions written in the C programming language.
This guide assumes that HANcoder has been downloaded and installed successfully.

The guide is based on an example: a Signal Tower.
The signal tower consists of four layers with two RGB LEDs per layer. Each color can be assigned a value between 0 and 255.
The signal tower is implemented by using WS2812B RGB LEDs
The timing required for generating a serial signal is implemented in C-code by using the microcontroller's SPI.

The result in Simulink will be as follows:
File:Sigal tower block final result.png

• Part 1: Matlab/Simulink files
• Part 3: Creating a block in Simulink
• Part 2: C source files
• Part 4: Updating the build environment
• Part 5: Testing the project